HIGH POWER LASERS FOR INDUSTRY
YUCCA 100 W @ 343 nm
YUCCA 160 W @ 515 nm
SPEED UP UV
PROCESSING WITH
Pulse duration 2 ns to 10 ns or Burst
ADD AGILITY TO
MICROMACHINING
PROCESSING WITH
Programmable pulses 2 ns to 20 ns or Burst
PICOSECOND UV
PROCESSING WITH
| Power | 100 W up to 1 MHz | 60 W up to 600 kHz | 45 W up to 500 kHz | 30 W up to 400 kHz |
| Pulse Duration | 2 ns, 5 ns, 10 ns or Burst | |||
| Max Pulse Energy | 800 µJ | 300 µJ | 225 µJ | 300 µJ |
| Beam Quality | M² < 1.2 | |||
| Power | 160 W up to 1 MHz | 100 W up to 1 MHz | 80 W up to 600 kHz |
| Pulse Duration | 2 ns, 5 ns, 10 ns or Burst | ||
| Max Pulse Energy | Up to 800 µJ | Up to 500 µJ | Up to 400 µJ |
| Beam Quality | M² < 1.2 | ||
| Wavelength | 343 nm | 515 nm |
| Power | 100 W / 50 MHz | 160 W / 50 MHz |
| Pulse Duration | 50 ps | |
| Beam Quality | M² < 1.2 | |
| Wavelength | 343 nm | 515 nm |
| Power |
60 W / 400 kHz / 7.5 ns 60 W / 1 MHz / 2 ns |
120 W / 400 kHz / 7.5 ns 120 W / 1 MHz / 2 ns |
| Pulse Duration |
2 ns, 5 ns, 7.5 ns, 10 ns or Burst |
|
| Max Pulse Energy | Up to 300 µJ | Up to 600 µJ |
| Beam Quality | M² < 1.2 | |
| Wavelength | 343 nm | 515 nm |
| Power | 45 W up to 400 kHz | 80 W up to 400 kHz |
| Pulse Duration |
2 ns - 20 ns fully variable Programmable pulse Burst mode |
|
| Max Pulse Energy | Up to 300 µJ | Up to 600 µJ |
| Beam Quality | M² < 1.2 | |
| Wavelength | 343 nm | 515 nm |
| Power | 50 W / 50 MHz | 80 W / 30 MHz |
| Pulse Duration | 50 ps | 30 ps |
| Beam Quality | M² < 1.2 | |
| YUCCA 30-343 | YUCCA 45-343 | YUCCA 60-343 | YUCCA 100-343 | |
|---|---|---|---|---|
| Wavelength | 343 nm | |||
| Power |
30 W / 100 kHz / 10 ns 30 W / 400 kHz / 2 ns |
45 W / 200 kHz / 10 ns 45 W / 500 kHz / 2 ns |
60 W / 300 kHz / 10 ns 60 W / 600 kHz / 2 ns |
100 W / 200 kHz / 10 ns 100 W / 1 MHz / 2 ns |
| Pulse Duration |
2 ns, 5 ns, 10 ns or Burst |
|||
| Max Pulse Energy | Up to 300 µJ | Up to 225 µJ | Up to 300 µJ | Up to 500 µJ |
| Beam Quality | M² < 1.2 | |||
| YUCCA 80-515 | YUCCA 100-515 | YUCCA 160-515 | ||
|---|---|---|---|---|
| Wavelength | 515 nm | |||
| Power |
80 W / 200 kHz / 10 ns 80 W / 400 kHz / 2 ns |
100 W / 200 kHz / 10 ns 100 W / 600 kHz / 2 ns |
160 W / 200 kHz / 10 ns 160 W / 1 MHz / 2 ns |
|
| Pulse Duration |
2 ns, 5 ns, 10 ns or Burst |
|||
| Max Pulse Energy | Up to 400 µJ | Up to 500 µJ | Up to 800 µJ | |
| Beam Quality | M² < 1.2 | |||
| OYAT 50-343 | OYAT 100-343 | OYAT 80-515 | OYAT 160-515 | |
|---|---|---|---|---|
| Wavelength | 343 nm | 515 nm | ||
| Power | 50 W | 100 W | 80 W | 160 W |
| Pulse Repetition Rates | 30 - 50 MHz | |||
| Pulse Duration | 50 ps | |||
| Beam Quality | M² < 1.2 | |||
Advantages
-
High speed processing
- High frequency up to 1 MHz
- High power 160 W up to 1 MHz
- Up to 60 kW peak power
- The right alternative to Q-Switch lasers with high pulse repetition rate and short nanosecond pulses
- Nanosecond UV high-speed micro-processing raised to a next level of throughput
- Compatible with fastest scanner systems available on the market
-
Agile lasers
- Programmable pulses from 2 ns to 20 ns
- Burst mode
- Pulse shaping capability (temporal top-hat, burst, free temporal form)
- Constant pulse duration and beam parameters over the entire range of pulse repetition rate
- Minimized Heat Affected Zone with combination of short pulses and high peak power
- Pulse energy stability < 2% over the whole pulse repetition rate
-
Field proven
- Mature and field proven fiber technology
- Designed for 24/7 production environments
- HALT designed / HASS Certified
- Best manufacturing practices for long lifetime and high uptime
- Industry 4.0 ready
- Remote control and support
Why Bloom Lasers ?
BLOOM puts customer care and satisfaction in the core of its daily operations and strategic decisions. Since its creation, BLOOM has built an operational service team with local service installations for fast response time to our customers.
BLOOM designs, manufactures and delivers stable, reliable and long-term operations lasers for 24/7 environment productions. Its lasers are built on a fiber technology both mature and field proven. BLOOM has implemented high-end methodologies supporting design, quality and serviceability for 24/7 industrial operations.
BLOOM is installed in a brand new production facility including an ISO6 clean room, and is capable of high volume manufacturing and fast production ramp-up. With minimum assembly and alignment steps thanks to the fibered design, leads times are shortened.
Choosing BLOOM lasers for your microprocessing application is investing on the future with a scalable technology that will sustain faster throughput and cost reduction of your machines.
Our missions
-
Bring value to Industry
- Improve process throughput with more power and higher Pulse Repetition Rate
- Improve yield and maximize uptime of end-customer
- Bring agility to process with adjustable pulse duration
-
Design for Industry
- Built on reliable and mature technology
- Service strategy over the entire product lifetime
- Common products platform for optimized and efficient customer service
-
Innovate for Industry
- Innovation in UV conversion for industry
- Innovation in high power fibers
- Innovation in Industry 4.0 for lasers
News on lasers
Laser World of Photonics 2025
Come visit our booth at the 27th Laser World of Photonics, leading trade fair for photonics components, systems and applications.
This will be the opportunity to meet our team of experts and discuss your laser micromachining projects.
Dates : June 24 – 27, 2025.
Location : Munich, Germany
Hall 2 – Booth 429
Photonics West 2025
Come visit our booth at the World’s leading trade fair for components, systems and applications of photonics.
This will be the opportunity to meet our team of experts and discuss your laser micromachining projects.
Dates : January 28 – 30, 2025.
Location : San Francisco, USA
Booth 5029
Laser World of Photonics 2025
Come visit our booth at the 27th Laser World of Photonics, leading trade fair for photonics components, systems and applications.
This will be the opportunity to meet our team of experts and discuss your laser micromachining projects.
Dates : June 24 – 27, 2025.
Location : Munich, Germany
Hall 2 – Booth 429
Photonics West 2025
Come visit our booth at the World’s leading trade fair for components, systems and applications of photonics.
This will be the opportunity to meet our team of experts and discuss your laser micromachining projects.
Dates : January 28 – 30, 2025.
Location : San Francisco, USA
Booth 5029